5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Ethernet
For convenience, the HDVS-200-RX comes with DHCP on. This enables the scaler to be connected
to a network without knowing available IP addresses. If your network does not allow dynamic IP
addresses or if you are using the switcher with a TCP/IP control system, this feature may be turned
off and the IP address set using RS-232 commands or the webGUI.
To disable DHCP, use the following command: IPDHCP off. Once disabled, set the IP address using
the IPStatic command (e.g. IPStatic 192.168.1.56).
webGUI
The HDVS-200-RX provides a built-in webGUI for easy setup and control.
To find the IP address of the HDVS-200-RX, connect the HDVS-200-RX to a terminal using an RS-
232 cable, and use the following settings: baud rate: 115200, data bits: 8, flow control: None,
stop bits: 1. Use the IPCFG command to display the IP address. Launch a web browser and enter
the IP address of the switcher.
A login screen will appear (this is the same log in for admin and general users). The login for the
webGUI will be username “root” and password “Atlona”.
