AT-HDR-H2H-88MA
19
IR Remote Control
The AT-HDR-H2H-88MA comes with an IR Remote Control for easy routing.
Power
On
Off
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Input
Output
MSR 1
Power On
- Turn the unit on.
Power Off
- Set the unit into standby mode.
Output
- Select the number key for the corresponding output port for
routing.
Input
- Select the number key for the corresponding input port for routing.
NOTE:
Only buttons 1 through 8 are used in the Input and Output
selections.
To route the HDMI inputs and outputs:
1. Make sure the unit is powered on, if not, select the
Power On
button.
2.
Press the Input # button of the device to route.
3.
Press the Output # button for the device the input will be routed to.
The selected input will route to the output.
