3
Installation Guide
AT-HDR-EX-70-2PS
1. Connect a UHD/HD source to the
HDMI IN
port on the AT-HDR-EX-70-2PS-TX.
2. Connect a UHD/HD display to the
HDMI OUT
port on the AT-HDR-EX-70-2PS-RX.
3. Connect an Ethernet cable, from the
HDBaseT OUT
port on the AT-HDR-EX-70-2PS-TX,
to the
HDBaseT IN
port on the AT-HDR-EX-70-2PS-RX.
4. Connect each of the included 5 V DC power supplies to the
DC 5V
locking power
receptacles on both the AT-HDR-EX-70-2PS-TX and AT-HDR-EX-70-2PS-RX.
Do not over-tighten or apply high-torque devices to the locking connector. Doing so may
damage the power receptacle and/or locking connector.
5. Connect each of the power supplies to an available AC outlet.
Installation
Connection Diagram
DC 5V
HDBaseT IN
HDMI OUT
Video
Video
Video
AT-HDR-EX-70-2PS-TX
AT-HDR-EX-70-2PS-RX
AT-JUNO-451
Display
DC 5V
HDBaseT OUT
HDMI IN
1
2
3
4
HDMI IN
HDMI OUT
OPTICAL
AT-JUNO-451
RS-232
IR IN
LAN
DC 5V
TX
S
RX
Video
HDBaseT
Video
Set-Top Box
Blu-ray Player
Media player
4
media4
SET
-TOP B
OX
OK
224
IMPORTANT:
The DIP switch, on the bottom of both the transmitter and
receiver, must be set to
HDBaseT
mode for normal operation.
