Operation and IR Control
Method A: Push Button
Push the switch button on the front panel, the source will be sequentially changed.
Method B: IR Remote Control
a. Please press to enter IR control mode
b. Decide which output port to be controlled by pressing F1 to F4
Note: If the setting is correct, the corresponding LED will flash. If
not, please press output port select button or repeat step a and b.
F1 HDMI output #1
F2 HDMI output #2
F3 HDMI output #3
F4 HDMI output #4
c. Use or keys to select input source.
Note: If the setting is correct, the corresponding LED will flash. If no response, please
wait until the LED stops flashing, and try again.
Left button to switch channels in increasing order (1, 2, 3, 4, 1, ...)
Right button to switch channels in decreasing order (1, 4, 3, 2, 1, …)
Source Side
6
