6
A login screen will appear
(this is the same log in for admin and general users)
. For the first log in
(and future
admin changes)
the username is “root” and password is “Atlona”.
Note:
Only the admin password can be changed (see page 11). The username will always remain “root”.
Network Connections
For convenience, the HD-SC-500 comes with DHCP on. This enables the switcher to be connected
to a network without knowing available IP addresses. If your network does not allow dynamic IP
addresses or if you are using the switcher with a TCP/IP control system, this feature may be turned
off and the IP address set using RS-232 commands or the webGUI.
WebGUI
Atlona has created an easy to use webGUI for initial setup and later changes to the configuration of
the HD-SC-500.
To begin, plug a LAN cable into the LAN port of the HD-SC-500 and the network switch, then type
the IP address of the unit into a web browser of a PC connected to the same network
(as seen below)
.
To find the switcher IP:
Select “Information” within the OSD menu or use RS-232 command
“IPCFG”.
Important:
If any stability issues are experienced, disable any anti-virus or firewall that may interfere with
network communication to the switcher. Once set up is done and the switcher webGUI is no
longer being used, the firewall and anti-virus can be re-enabled.
The Info screen displays general system information.
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
