15
IP Commands
Each command is terminated with a carriage return.
Feedback is terminated with a carriage return and line feed.
Note:
If the command fails or is incorrect the feedback should be “Command FAILED”
Command
Feedback
Description
IPCFG
IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port: x.x.x
Displays IP address configuration
IPTimeout XX
e.g.
IPTimeout 120
IPTimeout XX
e.g.
IPTimout 120
Determines amount of seconds of inactivity before TCP/IP
disconnects
IPQuit
IPQuit
Logs out of TCP/IP
IPAddUser
TCP/IP username & password list:
- user password
- user password
- user password
Will display a list of users
IPAddUser X Y
TCP/IP user was added
Add a user for TCP/IP control. X=User Y=Password
e.g.
IPAddUser Atlona 1234 (User=Atlona 1234=Password)
IPDelUser X
TCP/IP user was deleted
Delete a user from TCP/IP X=User (Ex. IPDelUser Atlona)
IPDHCP sta
IPDHCP sta
e.g.
IPDHCP on
Displays the status of DHCP
IPDHCP on
IPDHCP on
Turns DHCP on
IPDHCP off
IPDHCP off
Turns DHCP off
IPStatic X Y Z
e.g.
IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
IPStatic X Y Z
e.g.
IPStatic 192.168.1.1
255.255.255.0 192.168.1.200
Sets static IP address
IPStatic Address(X) Netmask(Y) Gateway(Z)
IPPort X
IPPort X
Set the TCP/IP port (ex. IPPort 230)
IPLogin sta
IPLogin sta
e.g..
IPLogin on
Displays IPLogin status
e.g.
IPLogin is on
IPLogin on
IPLogin on
Enables IPLogin
IPLogin off
IPLogin off
Disables IPLogin
Broadcast sta
Broadcast sta
Displays broadcast mode status
Broadcast on
Broadcast on
Enables broadcast mode
Broadcast off
Broadcast off
Disables broadcast mode
UartPara W,X,Y,Z
e.g.
UartPara 115200,8,0,1
UartPara W,X,Y,Z
e.g.
UartPara 115200,8,0,1
Set UART parameters
W=baud rate X=data length Y=parity Z=stop-bit
e.g.
Set the parameters to 115200, 8, 0, 1
UartPara sta
UartPara W,X,Y,Z
Displays UART parameters
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
