background image

13

www.atlona.com | toll free: 

1-877-536-3976

For International: 

1-408-962-0515

NOTICE:

1.  When adjusting the signal level on the receiver unit, please dial the rotary control switch from MIN to MAX and 

stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may 

cause overpowering issue that would shorten the product life significantly!

2.  If the DVI or HDMI

TM

 device requires the EDID information, please use AT-DVISync EDID Reader/Writer to retrieve 

and provide DVI or HDMI

TM

 display EDID information.

3.  All HDMI

TM

 over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz UTP cable and 

ASTRODESIGN Video Signal Generator VG-859C.

4.  The transmission length is largely affected by the type of Cat-5/5e/6 cables, the type of HDMI

TM

 sources, and 

the type of HDMI

TM

 display. The testing result shows solid UTP cables (usually in the form of 300m [1,000ft] bulk 

cables) can transmit a lot longer signals than stranded UTP cables (usually in the form of fixed length patch 

cords). Shielded STP cables are better suited than unshielded UTP cables. A solid UTP Cat-5e cable shows 

longer transmission range than stranded STP Cat-6 cable. For long extension applications, solid UTP/STP cables 

are the only viable choice.

5.  EIA/TIA-568-B termination (T568B) for Cat-5/5e/6 cables is recommended.
6.  To reduce the interference among the unshielded twisted pairs of wires in Cat-5/5e/6 cable, one can use double 

shielded STP cables to improve EMI problems, which is worsen in long transmission.

7.  Because the quality of the category cables has the major effect on how long the transmission limit can achieve 

and how good is the received picture quality, the actual transmission range is subject to one's choice of Cat-5/5e/6 

cables. For desired resolutions greater than 1080i or 1280x1024, a Cat-6 cable is recommended. 

8.  If your HDMI

TM

 display has multiple HDMI

TM

 inputs, it is found that the first HDMI

TM

 input [HDMI

TM

 input 1] generally 

can produce better transmission performance among all HDMI

TM

 inputs.

Summary of Contents for AT-HD-BIR40SR

















Reviews: