atlona-asia.com.cn
9
Analog Audio
A captive screw analog audio connector is provided to ensure a more reliable and secure
connection. The captive screw connector supports unbalanced audio output.
Audio is broken out from the selected HDMI input. If HDMI source 3
(
Ex.
set top box)
is selected then
both the corresponding HDBaseT port and analog audio port will output the set top box audio.
Audio must be 2Ch PCM or the analog audio port will pass no audio.
Note:
Analog audio ports will mirror the corresponding HDBaseT output port
Ex.
Analog output 2 will mirror HDBaseT output 2
Unbalanced audio connections use two wires for connection with consumer audio components.
Tip (+)
RCA
Sleeve ( Ground)
Note:
Pin outs may vary, please refer to the audio device's manual to ensure a correct connection.
Important!
When terminating cables, please ensure exposed adjacent wires do not touch. This may result in
a short that can damage connected devices.
UNBALANCED
L
+
/
R
+
+
+
For an easier and time saving solution for analog audio, the optional Atlona Captive Screw Ready 2
Channel Unbalanced Audio Cable
(AT-LC-CS-2CH-2M)
features pre-stripped wires at one end and RCA
connectors at the other end. Purchase these at http://www.atlona.com
To connect these, use the red wire in the right positive port, the white wire in the left positive port,
and the black can be placed in either ground port.
atlona.com
7
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Connection Diagram
Blu-ray player
Set top
box
Video
HDBaseT
Audio
Control
Media Device
3
AT-UHD-EX-100CE-RX
Media Device
SPEAKER
+
-
SPEAKER
+
-
SPEAKER
+
-
SPEAKER
+
-
SPEAKER
+
-
SPEAKER
+
-
Multi-channel Zone Amplifier
AVR
Control System
AT-UHD-EX-70C-RX
Router
AT-UHD-EX-100CE-RX
4
RXTX
5
P S
Blu-ray player
Set top
box
AT-IR-CS-TX
AT-UHD-EX-70C-RX
Control System
AT-IR-CS-TX
Router
Note:
These products are meant for indoor use only. Do not install or connect the products to any outdoor components.
atlona.com
8
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Matrix Front Panel Functions
The AT-HD-1600-SL's front panel has 2 functions: I/O control, and matrix settings. The
following sections go over step by step setup & control.
I/O Control
To
route
an input to an output
I.E.
Input 1 to output 1
To
Mirror
input to output
To
route
an input to all output
I.E.
Input 2 to all output
atlona
-asia.com.cn
5
R
