5
Assembly
Step 1:
Place contents on soft, flat surface. Align bottom leg bar (I) hole with
right and left legs (E and F) as shown in the image above. Insert washer (3) over
hole and insert small bolt (1). Use hex key to tighten bolt, being careful not to
overtighten.
Step 2:
Align chair seat (G) with holes at the front of chair legs (E and F) as
shown in the image above. Insert washer (3) over hole and insert small bolt (1).
Use hex key to tighten bolt, being careful not to overtighten.
1
3
1
3
Chair Instructions:
I
E
F
G
E
F