4
Assembly
Step 1:
Place tabletop (A) upside down on soft, flat surface. Align table leg (B)
hole with corresponding table top hole. Place washer (3) over table top hole and
insert small bolt (1). Use hex key to tighten bolt, being careful not to overtighten.
Repeat for remaining table legs.
Step 2:
Align table frame (C) holes with corresponding table leg holes. Place
washer (3) over holes and insert large bolts (2) to attach frame to table legs. Use
hex key to tighten bolts, being careful not to overtighten. Repeat for remaining
table legs.
Table Instructions:
1
3
1
3
B
A
2
3
2
3
C