ATLASIO SHD+ Assembly Instruction Manual Download Page 15

15

Smart Height Adjustable Desk

+

 SHD

+

This label means that this prod-
uct must not be disposed of 
with other household waste an-
ywhere within the EU. In order 
to protect the environment or 
human health from uncontrolled 

disposal, it must be recycled responsibly. To 
dispose of the device after use, please use 
the local waste return and collection systems 
or contact the dealer from whom the product 
was purchased. 

In addition, this product also complies with:

EMC Directive 2014/30/EU, EN 61000-6-3:2007+A1, 
EN 61000-6-1:2007 LVC Directive 2014/35/EU, 
EN 60335-1:2012+A1, EN 6223:2008

MANUFACTURER:

Pantes GmbH, Maria-Theresia-Str. 11,  

81675 Munich, Germany

Munich, 30.09.2021

 

WARNING! PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY. THERE IS RISK 
OF INJURY. IMPORTANT INFORMATION Read these instructions carefully before 
beginning assembly. 

Children must not use this product without supervision! This product contains small items 

which may present a serious choking hazard if swallowed. 

This product is for indoor use only. Outdoor use may cause damage to the product and/or per

-

sonal injury. 
Children must not be allowed to play with this product! 
This product may be used by children aged 10 years and above and persons with restricted 

physical, sensory or mental capacity, provided they have been previously instructed in its oper-

ation and informed of the possible hazards. 

Cleaning and maintenance must not be carried out by children without supervision. 
If the power cord is damaged, it must be replaced by the manufacturer, the manufacturer’s cus-

tomer service provider, or a similarly qualified person in order to prevent any hazards. 

IMPORTANT:

 Before assembly, make sure that you have received all the parts according to the 

component checklist. If any parts are missing or defective, contact your local dealer. DO NOT 

overtighten the screws during assembly! 

CAUTION: 

• This product can only be used in accordance with the standard technical guidelines. 
• Do not use this product near corrosive gas, water or in dusty environments.
• Please do not disassemble all components, otherwise claims under the warranty will be void.

SAFETY AND IMPORTANT 

INFORMATION

• This desk complies with the prescribed safety regulations. Im

-

proper use can result in personal injury and damage to the desk. 

• Please read the entire operating manual BEFORE using the 

desk for the first time. It provides you with important infor

-

mation on the safety, use, installation and maintenance of the 

desk and therefore protects you/your children from injury and 

prevents damage to the desk. 

• Please keep this operating manual in a safe place and pass it 

on to a any new owner.

USE

• Electric motor-driven height-adjustable desks are intend-

ed for dry working environments only (0~40˚; 20~90% rel

-

ative humidity). The desk is infinitely height-adjustable for 

the best possible ergonomic working conditions. 

• The desk has not been designed for any purpose other 

than  those  contained  in  the  manual.  For  example,  it  must 

not be used in rooms with high humidity or moisture levels, 

nor be used for lifting persons. Any other usage is undertak

-

en at your own risk! 
• Do not crawl under the desk frame, lie there or move 

around there, and do not sit or stand on the desk frame. 
• Children should only use the desk under adult supervision. 

Liability: Under no circumstances does the manufacturer 

assume liability for damage caused by the improper use or 

handling of the desk frame, or for any use or handling other 

than that described in this operating manual.

ASSEMBLY AND INSTALLATION

• Once the desk is assembled (see assembly instructions), the adjustable 

feet are installed and the desk is level and secured against movement, the 

desk is then connected to the 100~240 VAC power outlet and the desk is 

ready for use.

• Make sure that no cables can become pinched or clamped. This also ap-

plies to telephone, computer or lamp cables. Also make sure that all cables 

are positioned so as to avoid trip hazards.

• Place the desk at a safe distance away from windows, radiators, furniture, 

etc. so that no persons or objects can become trapped in between.

• Do not place objects taller than 55 cm under the desk.

CLEANING 

Periodically remove dust and dirt from the desk frame, especially the guide 

tubes, and make sure there is no sign of damage or cracks. Check that all 

fixing screws are securely attached, as well as all plugs and sockets, cables 

and connectors, and that they are working properly. The control unit, the 

control panel and the desk frame must only be cleaned with a dry or slight-

ly moistened cloth. Risk of personal injury! Aggressive cleaning agents can 

cause damage or color changes to the product. Therefore only agents with 

a pH value of 6~8 should be used. Do not allow liquids to enter the system 

(control unit, control panel, cable, and frame). Risk of personal injury!

DECLARATION OF CONFORMITY

We hereby declare under our sole responsibility that the product – 

ATLASIO

  

height-adjustable desk – complies with Directive 2006/42/EC of the Europe

-

an Parliament and the Council of 17 May, 2006 on machines and the amend-

ment of Directive 95/16/EC (revised). With regard to the above-mentioned 

Directive, please note that: – Sit-stand desks are considered as machines, and 

– A sit-stand desk must not be used before it has been completely assembled 

and installed according to the above instructions.

M O R E   I N F O R M AT I O N S

DISPOSAL

Summary of Contents for SHD+

















Reviews: