13
Smart Height Adjustable Desk
+
SHD
+
PROGRAMME PRE-SET HEIGHT
It is possible to store 3 pre-set height positions.
1.
Use the keys to set the desired height. This is shown in the display window.
2.
Press the memory key. “ ” is shown in the display window.
3.
Press one of the pre-set height number keys , , . The number corresponding to the number
key selected is shown in the display window: “ ”, “ ”, “ ”. The display window will return to
showing the set height.
4.
Repeat for each of the pre-set keys , , .
5.
Memory location query: Click “ / / “ button in a short time, and the display flashes to display
the corresponding memory height.
6.
Memory location run: Double click or long press “ / / “ button, the desktop will automatically
run to the height of memory location, during running, any key can stop running.
M
1
2
3
1
2
3
1
2
3
RESTORE FACTORY MODE
Press and hold and at the same time until three transverse lines “ ” are displayed, and the
initialization mode is automatically entered, and the table will automatically run. After waiting to stop,
it indicates that the initialization is successful.
When “ ” or “ ” is displayed on the LCD, hold down for 5 seconds. When “ ” is displayed
on the LCD, release. At this point, the desktop will automatically run to the lowest point of the machine,
and then run up to a fixed position and stop, the reset process is over.
TIMER SETTING AND OPERATION
Time setting / start:
Short press key, press until the time you want to select is displayed (T30 = 30 minutes, T45 = 45
minutes, T60 = 60 minutes), start the timing function. For example, when selecting T30, the display will
decrease from T30, T29, T28, T27... Keep rewinding T00, and then the screen flashes to display CHR. Press
any key to stop blinking or automatically stop blinking after blinking for 1 minute and exit timing mode.
Cancel timing mode:
Short press button, display height, timing mode cancel.
Other instructions:
1. After the timer starts, the key will be invalid and the screen will not be locked automatically.
2. Operate the lifting button and memory button (except ), the timer keeps working and automatically
decreases the time. For example, the monitor shows T21, at this point, adjust the desktop height, the
monitor shows the desktop height. T21/T20 is displayed after the adjustment is complete.
USB CHARGER
Please connect correctly with type C and the USB charger with desk.
T
T
T
M
USB: QC3.0 18W
Type C: PD45W
??
??
1
2
3
??
??
??
T
Summary of Contents for SHD+
Page 16: ...w w w a t l a s i o d e...
