Operation
29
TC255
• Press down on the pedal (M) to rotate the spindle fl ange in a clockwise
direction until the lower bead drops below the top edge of the rim
completely.
• Press the upper bead of tire with the upper bead disc by approximately 1”
(ref. fi g.15).
• Press the upper bead in 5 o’clock position with the press tool of the press
arm (ref. fi g.15).
• Press down on the pedal (M) to rotate the spindle fl ange in a clockwise
direction until the upper bead drops below the top edge of the rim
completely (ref. fi g.16).
