manualshive.com logo in svg

Atlas TC255, Installation & Operation Manual

Share
Download
Atlas TC255 Installation & Operation Manual Download Page 10

General Information 

10

TC255

CONTROL LEVER “D”

•  When it is pushed upwards, the bead breaker arm moves upwards.
•  When it is pushed downwards, the bead breaker arm moves downwards.

2.3.3  Leverless Mounting Tools 

CONTROL LEVER “H”

•  When it is pushed downwards, the tool is out of its seat and 

moves downwards.

•  When it is pushed upwards, the tool moves back in position. 

2.3.4 Bead 

Press 

Arm

The bead press arm is used to 

facilitate mounting and demounting 

the run-fl at tire. It can be moved 

upwards and downwards by means 

of the control lever (E).

2.3.5 GT 

Infl ation System

The GT infl ating system consists of the 

gauge, the tire defl ation button (G) and 

the quick blasting device.

• To infl ate the tire, press the pedal 

(Z) at side of the machine. 

• During infl ation, if the pressure 

exceeds the value recommended 

by the tire manufacturer, press the 

button (G) to defl ate the tire. 

•  To make the quick blaster, position 

the blasting nozzle towards the rim 

center just under the rim lip and 

press the buttons (F). 

Summary of Contents for TC255











































Reviews:

No comments

Brands by name

Popular brands

Load more brands