manualshive.com logo in svg

Atlas PWB 50, Use And Maintenance Instruction Manual

The Atlas PWB 50 User And Maintenance Instruction Manual is available for free download on our website. This comprehensive manual provides detailed guidance on using and maintaining the Atlas PWB 50. Get all the essential information you need to maximize the performance and longevity of this incredible product. Download now from manualshive.com.

Share
Download
background image

24

9.0 USE OF THE WHEEL BALANCER

9.1 Presetting of wheeldimensions

The balancing data is set by means of an “intelligent” automatic gauge; confirmation of the measurement and 

the position appear on the display. The round part of the gauge must rest on the rim where the weight will be 

positioned.

Using the special grip, move the end of the gauge against the rim in one of the positions A/B shown in 

relation to the kind of repeater set (

 TYPE OF REPEATER

).

 ▪ The measurement is the same in position A or B. If the correction type is with adhesive weights on the

   inside (ALUM), to enable the position repeater function, press the   

 button .

a

b

While the gauge is moving the following appears:

  

when the measurement has been stored: 

If the acoustic signal is enabled ( 

ACOUSTIC SIGNAL

), the acquisition of the dimensions is accompanied by a 

“beep”.

a) standard weights:

 when only one measurement is made, the machine interprets the presence of a rim with clip-on

    weight correction  

Summary of Contents for PWB 50













































Reviews:

No comments

Related manuals for PWB 50

Brands by name

Popular brands

Load more brands