AtlasSound.com
– 6 –
Owner’s Manual
PA40G / PA60G
Commercial Amplifiers
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Front Panel
1. Power Indicator
This LED illuminates when the AC Mains is plugged in.
2. Limit Indicator
The LIMIT LED will illuminate when the PA40G/PA60G is in a clipping condition, caused by excessively high input levels or a GAIN
control is turned up too high. An occasional flash is OK. Check that the proper signal level is being fed into the inputs and/or turn the
input gain down until the LED is no longer illuminated. Refer to Limit LED & Load Conditions for more information.
3. Signal Indicator
When the signal LED illuminates, this indicates that input signals connected to the amplifier are capable of driving the PA40G/PA60G to
full power.
4. Input 1 Gain
Input 1 level control potentiometer varies the amplitude of the signal fed into the amplifier. Turn clockwise to increase and
counter-clockwise to decrease the signal level.
4
1
2
3
Left In
Right In
100V - 240V 50Hz/60Hz 1A
Balanced Input
Summed Inputs
1601 Jack McKay Blvd
Ennis, TX 75119
800.876.3333
AtlasSound.com
Power
Limit
Signal
Level
PA60G Front Silkscreen Artwork
60 Watts
70.7V/100V
Speaker Out
