6
III. STEPS OF INSTALLATION
A. Location of Installation
Check and ensure the installation location (concrete, layout, space size etc.) is
suitable for lift installation.
B.
Use a carpenter’s chalk line to establish installation layout of
columns
(See Fig. 6).
C.
Check the parts before assembly
1
．
Packaged lift and hydraulic power unit
(see Fig. 7)
2. Move the lift aside with a forklift or hoist, and open the outer packing carefully
，
take off the parts from upper and inside the column, take out the parts box
，
check
the parts according to the shipment parts list
(See Fig. 8).
Fig. 6
Fig. 7
Shipment Parts
list
Serial number
Top beam
Fig. 8
Chalk Line
Parts box.
144 3/8
”
Summary of Contents for OH-10X
