11
H.
Check the vertical plumbness of the columns with a level and adjust with the shims
if the columns are not vertical. Tighten the anchor bolts
(See Fig.17)
.
Tighten
Adjust level
with the shims
Fig. 17
Note: Torque of Anchors is 150 Nm
or 110 Ft Lbs.
Measure the
vertical of column
from front and side
by a lever bar or
not.
34
Summary of Contents for OH-10X
