Atlas FAP62T, Product Catalog

Page: 59 / 124

AtlasSound.com AtlasSound.com
800.876.3333
57
Five
Micro Infrared Repeaters & Flashers
M-1A Series
Atlas Sound IR repeaters allow the operation of virtually any IR-controlled A/V component from multiple
room locations. The
M-1A
repeater will receive the IR signal and rebroadcast it to the small
F-1
flasher LED positioned
on the front of each A/V component. The
F-1
forwards the signal to the source component's IR receiver.
These micro repeaters feature an attractive, flush, white lens that blends with any white surface. Their high sensitivity
enables use within a 40 foot range with fast reaction time and minimal interference. Repeaters are available installed
on a white decorator-style subplate (cover plate not included) or separately for flush-mounting in a ceiling, wall,
cabinet or speaker grille.
F-1 Series
Small
F-1
flasher LEDs are shipped with an adhesive backing and
1
⁄
8
" phone plugs for connection to
all IR-controlled A/V components. Up to six flasher units may be connected to a single
M-1A
repeater using two
M-1CB4B
connector blocks or any standard adapter (by others).
Note: some high-end A/V components are equipped to accept hard-wired IR signals. In this case, F-1 flashers would not be necessary.
Model Description Current Draw Style Color
M-1A
IR Repeater 12 mA Flush Mount White Lens
M-1AJW IR Repeater 12 mA Wall Mount, Supplied on Decorator Subplate* White Lens,
White Subplate
F-1 Flasher .05 mA Surface Mount Black Lens, Black Cord
* Order Sound decorator-style cover plate separately.
** Order Model M-1A separately.
Stand-Alone IR Repeater System
M-1CB4B For installation flexibility, the M-1CB4B amplified connector block is offered as a plug-in interface device
that provides connections for an M-1A Series repeater, four F-1 flashers, and power supply Model PS-M12 . This con-
figuration allows IR operation of up to four A/V components from up to four room locations. The M-1CB4B offers
1
⁄
8
"
mini jacks for power supply Model PS-M12 and up to four F-1 flashers; it also provides terminals for wiring up to four
M-1A repeaters (rooms) in parallel fashion and a data jack for connecting a mini-pin IR source or another M-1CB4B .
The unit's amplified circuit design supplies clear, strong IR data to source components.
This stand-alone IR repeater system requires: one M-1A repeater in each remote room location, one M-1CB4B for
every four A/V components, a PS-M12 power supply, and one F-1 flasher for each A/V component. For installations
which require control of more than four components or transmission from more than four rooms, multiple M-1CB4B
blocks may be used.
Note: each M-1A repeater can control a maximum of six F-1 flashers.
PS-M12 A compact UL-listed 12VDC, 200 mA power supply with a 6' cord. The required input voltage is 120V. Supply
includes a
1
⁄
8
" mini-plug for direct connection to the M-1CB4B connector block (powers up to four F-1 flashers) or for
use with up to two switched WhisperTouch ® volume controls.
Remote
Range:
Maximum 40'
at 30˚off axis.
M-1CB4B
PS-M12
F-1 M-1AJW* M-1A
*(Shown with cover plate,
Sold separately.)
Atlas Sound Infrared Repeater System & Devices