manualshive.com logo in svg

Atlas ECS-204, Owner'S Manual, Page: 6 / 20

Share
Download
Atlas ECS-204 Owner'S Manual Download Page 6

 AtlasSound.com 

– 6 – 

Specifications are subject to change without notice.

Owner’s Manual

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

ECS-204 

20A Power Conditioner & Sequencer

Key Features

 

•   9 Total 20A Outlets

 

 

•   2 Front Panel Unswitched Outlets

 

 

•  1 Rear Panel Unswitched Outlets

 

 

•   6 Rear Panel Outlets are Sequenced in Three Stages

 

•  Sequenced Output Trigger for an ECM-15SH, ECM-20SH or an additional ECS-204

 

•   Selectable Sequence Times from 3 Seconds to 2 Minutes

 

•   Linkable up to 3 ECS-204 Units 

 

•   Radio Frequency (RFI) and Electromagnetic Interference (EMI) Filters

 

•  Dual Clamping Spike & Surge Suppression, DCS Circuitry

 

•  Front Panel Digital AC Mains Voltmeter

 

•  Emergency Power Down (EPD)

 

•  Extreme Voltage Shutdown (EVS) Below 102V or Above 132V AC Line with Selectable Auto or Manual Reset

 

•  External Switch Sequence Trigger Activation, Momentary or Latching Switch

 

•  External DCV Sequence Trigger Activation 5-24VDC

 

•  Circuit Breaker Protection @ 20 Amps Indicated by “Breaker Open” Indicator

 

•  AC Fault, Wiring Fault, and Abnormal Voltage Indicators

 

•  Dual Front Panel USB Charge Ports for Charging USB Devices or Gooseneck Style Lamps

 

•  Rear Panel XLR Receptacle for the Optional AP-GNL Gooseneck Lamp

 

•  Front Panel Mains Power Switch Security Cover

 

•  Optional Remote Key Switch

 

•  AC Power Cord Retainer

Applications

The ECS-204 was designed to be flexible with features that allow it to be used in a variety of applications. The sequenced outputs 
allow the turning of equipment On and Off in a particular order, to eliminate an in rush of current and audible pops that often occur 
with non-sequenced power strips. It also can be used solely for protection against lightning strikes or voltage surges. If fuzzy video 
or frequent static pops occur, the AC power conditioning will eliminate or reduce those inconveniences. The following are just a few 
examples of applications the ECS-204 can be used:  

  • Restaurants

 

•  Houses of Worship

  • Schools

 

•  Home Theaters

 

•  Office Buildings

 

•  Sports Bars

Summary of Contents for ECS-204





















Reviews:

No comments