Page 9
For technical questions, please call 1-888-866-5797.
Item 56992 56998
SaFEty
OPEra
tiOn
MaintEnancE
SEtuP
assembly instructions
read the EntirE iMPOrtant SaFEty inStructiOnS section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagrams near the end of this manual.
Only use accessories and attachments that have been found to be acceptable for use with the lawn mower.
use of any other accessory or attachments might increase the risk of injury.
attach upper Handle
1. Lift Upper Handle and carefully line up with
Lower Handles without pinching or twisting cables.
2. Connect Upper Handle to Lower Handles
with Handle Connect Knobs (53) and
Handle Bolts (55). Tighten securely.
upper
Handle
Lower
Handle
Handle
connect
Knob (53)
Handle
Bolt (55)
56992 Shown
3. Unlock Lower Handles: Pull out and rotate
Handle Lock Knobs 90 degrees.
4. Move Handle assembly to operating position, locking
each side into preferred handle height position.
Check that both sides are securely locked into place.
Handle
Lock Knob
Handle Height
Positions
Locked
unlocked
5. Route cables through clips, then push clips to lock.
cable
clip
Push to
Lock
