Atmosphere Zone Master
User Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 27 –
General Settings Page
1. The General Settings page shows the connected port, with settings pages for Equalizer, Ambient Noise Compensation (ANC) Control and Limiter.
2. Priority Ducker Settings and Priority Input and Limiter Status:
•
The High Priority GPI is permanently set to the highest priority.
•
Message Player– select the “swap” button to arrange whether Msg Player or RMS Ducker has higher priority after GPI HP input.
The top selection is highest priority.
•
Priority Input Source Selection and Priority Threshold – when the selected priority input source’s RMS levels exceed the priority
threshold, the priority source will duck the normal input source channels.
Note:
The ducker dynamic settings are common for all
channels and are accessible via Settings > Device Settings.
•
Priority Input Status Indicator- will light yellow when the priority source is actively ducking the main source. It will be grey when inactive.
•
Limit indicator - will light yellow when the limiter is active. It will be gray otherwise.
3. Speaker Preset – select from a list of speakers and load output EQ tuning for that specific speaker.
4. Delay adjustment from 0 to 100ms with enable/bypass- typically used to sync sound when speakers are located far away and at different
distances from target audience.
