Atmosphere Zone Master
User Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 24 –
General Settings for A-BT Page
1. The General Settings page shows the connected port, with settings pages for Equalizer and Auto-Gain Control.
(
Note:
see UI pages for Mic/Line EQ and Auto-Gain definitions)
2. Accessory Name – displays reference to Port ID (A2) and the editable name for this accessory.
3. Connected Port ID (“A”) and location (“2”) of the accessory on the port wiring bus.
4. 0dB to +20 dB of preamp gain available to fine tune input sensitivity for -10dB sources
5. Bluetooth
®
– this is the editable name that will show up in your Bluetooth
®
mobile device connection list.
6. This “Locate” push on/ push off button will toggle the LED on the accessory to locate where it is installed. Flashing will automatically
stop after 30 minutes.
How to pair with the A-BT Wall Plate
1.
Using NFC
– Press the pairing button (1) and it will light blue.
a. With the mobile device Bluetooth® turned ON, tap your mobile device
to the NFC symbol (2) on the A-BT.
b. A-BT indicator (#1) will turn green after connecting succesfully.
2.
Manually
- Press the pairing button (1) and it will light blue.
a. Look in your mobile device Bluetooth® list and select the Bluetooth®
“Name” you entered on the General Settings page.
b. When a connection is established, the LED will turn from green.
c. Pressing the pairing button (1) when connected, will disconnect the pairing.
Note:
It will NOT auto-pair again, you must press the pairing button (1) or, tap
NFC (2) again to initiate a connection.
