Installation
25
BP8000
7.9 Installation Of Power Unit
• Attach the power unit onto the bracket on the power
side column;
• Secure it using nuts M10X20, the locking washers
D.10 and washers D. 10.
7.10 Connection Of Hydraulic Hoses
When routing the hydraulic hose, make sure that the hose is
clear of any moving part. Make sure to keep the hoses clean
from dust.
Make sure not to over-tighten the hose fi ttings so as to result in
oil leakage.
• Clean the hoses and fi ttings;
• Inspect all threads for damage and make sure that all hose fi ttings are in
good condition;
• Route the hoses referring the fi gure 15;
• Tighten the hose fi ttings thoroughly.
• Be sure to route the hydraulic hose and electric wire inside smaller
protective cover under the ramp as fi gure 16. Then fi x the cover on the
fl oor by supplied screws. Finally install the ramp.