ATLAS North America Proprietary
Sea Scan® ARC Explorer™ Manual
1 of 1
Page: 20
Issue: 4.2.1
2SFT1-0001
Manual
The ARC Explorer system is powered by either AC or DC. Each power source has a separate
power cable; the cables are provided with the system.
·
If covered, remove the cover, then plug the power cable into the TCU power connector.
·
Connect the receiver end to the power source.
·
Verify that the power light is off before proceeding.
WARNING:
Do not plug in the remaining hardware with the power on.
CAUTION:
The power is being drawn from the source at all times, regardless of whether TCU
power is on.
4.1.2.2
Tow Cable
·
Verify that the covers of both the TCU end of the cable and the TCU towfish connection are clean
and clear of debris.
·
Verify that the TCU power is off.
·
Plug the tow cable into the TCU.
4.1.2.3
Ethernet
Figure 22: Topside Communications Unit (TCU) Right View
The PC connects to the TCU by means of an Ethernet connection. Verify that the connector is
clean and clear of debris, then plug the TCU Ethernet cable into the TCU.
The ARC Explorer system will include an accessory and USB connection. These two connections
are not yet used.
