Atlas Copco QAS 150-200 Cud, Instruction Manual

Page: 16 / 82

- 16 -
Drain plugs and filler caps
The drain holes for the engine oil, the coolant and the
plug for the fuel, are located and labelled on the
frame. The fuel drain plugs are located; one at the
bottom of the frame and the other at the cubicle side
of the frame.
The drain flexible for engine oil can be brought to the
outside of the generator through the drain hole.
The filler cap for the engine coolant is accessible via
an opening in the roof. The fuel filler cap is located in
the side panel.
Indicates the partnumbers of
the different service packs
and of the engine oil. These
parts can be ordered to the
factory.
QAS 150 Cud,
QAS 200 Cud,
QAS 220 Cud
Every 250h
(Yearly)
QAS 170 Cud
xxxx xxxx xx
Every 1000h
xxxx xxxx xx
Engine oil PAROIL E PAROIL Extra
Engine coolant Parcool EG
5 l
(1.3 US gal)
xxxx xxxx xx xxxx xxxx xx
20 l
(5 US gal)
xxxx xxxx xx xxxx xxxx xx
210 l
(55 US gal)
xxxx xxxx xx
5 l
(1.3 US gal)
xxxx xxxx xx
20 l
(5 US gal)
xxxx xxxx xx
xxxx xxxx xx
210 l
(55 US gal)
xxxx xxxx xx
The drain hole can also be used to
guide external fueltank connections.
When connecting an external
fueltank, use the 3-way valves. Refer
to External fueltank connection (with/
without quick couplings).
!