Safety Information
EP5PTX15SR10-AT
4
© Atlas Copco Industrial Technique AB - 9836 2403 00
Directive (2011/65/EU). Lead metal will not leak or mutate
from the product during normal use and the concentration of
lead metal in the complete product is well below the applica-
ble threshold limit. Please consider local requirements on the
disposal of lead at product end of life.
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property
damage and/or severe bodily injury.
►
Read all Safety Information delivered together with
the different parts of the system.
►
Read all Product Instructions for installation, opera-
tion and maintenance of the different parts of the
system.
►
Read all locally legislated safety regulations regard-
ing the system and parts thereof.
►
Save all Safety Information and instructions for fu-
ture reference.
Statement of use
This product is designed for installing and removing threaded
fasteners in wood, metal or plastic.
No other use permitted. For professional use only.
Product Specific Instructions
Special precaution
• Check that the power socket is properly fastened.
• Replace the square drive retainer or socket if worn.
• Avoid unnecessary idling.
• When using a suspension yoke, make sure that it is in
good condition and correctly fastened.
Warning
WARNING Polymer hazard
The vanes in this product contain PTFE (a synthetic flu-
oropolymer). Due to wear, there might be PTFE parti-
cles inside the product. Heated PTFE can produce fumes
which may cause polymer fume fever with flu-like
symptoms, especially when smoking contaminated to-
bacco.
Health and Safety recommendations for PTFE must be
followed when handling vanes and other components:
►
Do not smoke when servicing this product
►
PTFE-particles must not come in contact with open
fire, glow or heat
►
Motor components must be washed with cleaning
fluid and not blown clear with an air line
►
Wash your hands before starting any other activity
Installation of vibrating tools
We recommend using a minimum length of 300 mm (12") of
flexible hose for compressed air between a vibrating tool and
the quick-action coupling.
General safety instructions
To reduce risk of injury, everyone using, installing, repairing,
maintaining, changing accessories on, or working near this
tool must read and understand these instructions before per-
forming any such task.
Our goal is to produce tools that help you work safely and ef-
ficiently. The most important safety device for this or any
tool is YOU. Your care and good judgment are the best pro-
tection against injury. All possible hazards cannot be covered
here, but we have tried to highlight some of the important
ones.
• Only qualified and trained operators should install, ad-
just or use this power tool.
• This tool and its accessories must not be modified in any
way.
• Do not use this tool if it has been damaged.
• If the rated speed, operating pressure or hazard warning
signs on the tool cease to be legible or become detached,
replace without delay.
Summary of Contents for 8431037616
Page 45: ...EP5PTX15SR10 AT Safety Information Atlas Copco Industrial Technique AB 9836 2403 00 45...
Page 53: ...EP5PTX15SR10 AT Safety Information Atlas Copco Industrial Technique AB 9836 2403 00 53...
Page 85: ...EP5PTX15SR10 AT Safety Information Atlas Copco Industrial Technique AB 9836 2403 00 85...
