7
PAGE
Repair Instructions No.176.11/95
PN 2000-2/ MF/ MF2/ N/ SMF2/ spec.N
Mounting the
gear box
1
Insert the spindle sleeve (9) into the gear
box.
2
Fit the gear wheel (1).
3
Insert the O-ring (3) together with the
discs. Mount the gear switch lever (7) and
the pin (8).
4
Place the complete gear box (5) onto the
motor housing.
5
Insert new switch levers (2) and (4) into
the gear box.
6
Fit the gear box (5) to the motor housing
and fasten with the four screws (6).
Mounting the
chuck
1
Mount the multi-function chuck (2).
2
Insert the tension pin (3) and the roll (1).
3
Insert the spring washer (4).
4
Only applicable for PN 2000 spec. N:
Mount the hammer chuck.
Test Run
Electrical Test
Check the direction of rotation!
Let the machine run-in.
Perform an electrical test on the machine (see chapter Electrical and Mechanical Test Instructions).
2
8
9
1
5
3
6
7
4
5
2 1
3
4
6
Summary of Contents for 2000-2/MF
Page 1: ......
