42
Other Device
Eacu USB device reports its own device type when plugged
into the USB Server.
Conecting
Device
Before You can use a network storage device You must first
connect to it. Basically this connection is like when You plug an
external USB storage device into Your PC. Please note that a
device can be connected by one user at time.
Te connection process would take a few seconds. Once
connected, the network USB Storage device would appear
under “MY Computer” as one of Your local drives.
Then You can access the data on the network usb storage
device as you would from a local hard drive on Your PC.
There are 3 ways to disconnect a device:
double-click on the device on the list.
using the Connect Device option on the right-click menu.
use the Connect Device button.
Disconnect
Device
Since each Network USN Storage device could only be
connected by one user at each time, you should disconnect a
device once you are done with it so other users could use it.
There are 3 ways to disconnect a device:
double-click on the device on the list.
using the Disconnect Device option on the right-click
menu.
use the Disconnect Device button.
Device control request: to request other user to release a
Network USB storage device, use this
Request Disconnect
Device
option from the right-click menu.
Of course this option would only be enabled when the device is
currently occupied by someone else. The current occupied user
will see a message into a pop-up windows.
If the occupying user deny when receive the r
Request
Disconnect Device
the system allow a new
Request
Disconnect Device
only after 3 minutes.
Summary of Contents for NetServer Advanced
Page 1: ......
Page 16: ...16 Impostazione Server Verr visualizzata la seguente schermata...
Page 37: ...37...
Page 56: ...Via S Antonio 8 10 Lainate MI Italy info atlantis land com...