![background image](http://html1.mh-extra.com/html/atlantis/netserver-advanced/netserver-advanced_user-manual_3000558031.webp)
31
1.2 Factory Default Settings
Before you configure this NetServer, you need to know the following default
settings:
Password:
LAN IP Address:
by
DHCP
(If a DHCP server isn’t available in the network,
the device will use
169.254.10.10
and Subnet Mask 255.255.255.0)
2.
PACKAGE CONTENTS
Open the box and carefully unpack it. The box should contain the following items:
NetServer Advanced PSU2
AC-DC Adapter (5V@2A)
1 x RJ45 CAT5 Cable
Quick Start Guide (English and Italian)
CD-Rom with Manual (English and Italian) and Utility
1 x Warranty Card and 1 x WEEE Card
If any item is found missing or damaged, please contact immediately your
local reseller for replacement.
3
. HARDWARE INSTALLATION
This section will lead you to install correctly this device.
Please follow these steps:
Connect a USB cable from the USB Printer (or other devices) to the USB port
on the NetServer Advanced.
Connect one end of the Ethernet patch cable to the Ethernet port on the
Netserver Advanced and connect the other end of the Ethernet cable to the
network (router, Ethernet switch/hub)
Connect the Power adapter to the USB Server.
Once you’ve checked all the connections the product will carry on immediately a
autotest. Finished this, the LEDs status will be the following:
LED
Status
PWR
Lit green
LAN ACT
Blinking green if any device is sending data, Lit when
cooected.
LAN Link
Lit Yellow
Summary of Contents for NetServer Advanced
Page 1: ......
Page 16: ...16 Impostazione Server Verr visualizzata la seguente schermata...
Page 37: ...37...
Page 56: ...Via S Antonio 8 10 Lainate MI Italy info atlantis land com...