NetFly AP1-54
3.
Select
Internet Protocol (TCP/IP)
and click
Properties
.
4.
Select the
Use the following IP address
radio
buttons (EG IP=192.168.1.2 and subnet
Mask=255.255.255.0).
5.
Click
OK
to finish the configuration
1.8 Browser configuration
Open the web browser, enter the local port IP address of this
Wireless Multi-Function Access Point, which default at
192.168.1.1
, and click
Go
to get the login page.
The default username is
admin
, password
admin
and click
OK
to continue. Click on the desired item to expand the
page with all settings in the main navigation panel.
Following next steps you can make operating Wireless
Multi-Function Access Point in short time using PCs in
DHCP mode. Refer to manual on Installation CD if you
need personalized configuration.
Setup wizard is provided as the part of the web
configuration utility. You can simply follow the step-by-step
process to get your wireless router configuration ready to
run in 6 easy steps by clicking on the
Wizard
button on the
function menu.
Quick Wizard Setup
The following screen will appear. Please click
Next
to
continue.