ENG
24
1.6 Connect telephone/LAN surge protection and USB
Connect a single line telephone into the RJ-11/RJ45 telephone surge/LAN protection
“IN” jack on the back of the UPS. Connect from the “OUT” jack with telephone cable
to a fax modem.
Connect the supplied interface cable to the USB computer interface port on the back
of the UPS. Connect to the computer. Download and install software from
. See software document for installation instruction.
1.7 Operation Test
Connect the UPS to the wall receptacle.
Push on the Main Switch, after some seconds LCD Display AC Mode is on.
Connect your computer equipment with sockets of the UPS and pull off the input
power cable of the UPS from the wall receptacle to check the Battery MODE is on
(instead of AC Mode). Meanwhile, please check if alarm buzzer is beeping every 10
seconds
