34
PORTE/Bottoni
MEANING
Rear Panel
Power Jack
Connect the supplied power adapter (DC, 5V@2A) to
this jack.
Power Switch
A Power ON/OFF switch.
RJ45 Port
Connect an UTP Ethernet cable to this port when
connecting to a PC or an office/home network of
10Mbps or 100Mbps.
Side Panel
WPS
USB Off
Press
USB off
button till LED flashing, then can
remove USB storage when LED stop flashing.
Press WPS for launch WPS process.
Reset
Please press both
reset
button for 5-10 seconds.
USB
Please connect a Data Storage.
1.7 Default Settings
The TCP/IP protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows relative manuals.
Before you configure this device you need to know the following default settings:
Password:
atlantis
IP address:
by DHCP, (If a DHCP server isn’t available in the network,
the DiskMaster will use 192.168.1.1 and Subnet Mask
255.255.255.0).
There is a
Reset
button on the back of DiskMaster which will
help return its IP, System ID, System Password and DHCP to
their factory default values. Hold at least 5 secs to restore to
Default.
In order to obtain a full reset please click
Reset
button here:
Advanced Tools->Reset configuration to Factory
Defaults.
