ENG
4
Control devices
Tap
My Home[
]
then
All Devices
. The app will display all the devices connected to the
account
Tap a device for control it and view the video stream. You can know immediately know the quality
of the wireless signal, listen to what was captured by the camera microphone, select the SD/HD
video stream and switch to full screen [
].
Tap
Screenshot [
]
save screenshots into the memory of your SmartPhone for viewing.
Tap
Speak [
]
activate the speaker to talk to a remote party.
Tap
Record
[
]
save videos directly into the memory of your SmartPhone for viewing.
More details can be changed here[
] then [
].
Tap
Playback
[
] in order to play the recorded video.
Tap
Motion Detection/Sound Audio
[
/
] in order to enable motion/sound detection.
The camera will send you push notifications and app alerts.
Tap
Cloud Storage [
]
in order to purchase a plan for upload encrypted video data.
You can remove the socket controlled by your account in one of the
following 2 ways:
(
APP
):
My Home
[
], tap on the device you want remove, tap [
] then
Remove Device
and
Confirm
. The camera plays the voice
message: "
Reset, camera reboots".
Reset: press the button for about ten seconds, until the camera plays
the voice message: "
Reset, camera reboots".
One device can only be added with one App account, if the device has been
added with another account already, then it can't be added to any another
account again.
Tap [
] for advanced settings:
Basic
Function
Settings:
To activate the Screen mirror (Flip Screen), display information with data
and time on the OSD (
Time Watermark
) and Talk mode.
Storage Setting:
here you can format the SD card.
Detection Alarm Setting:
in order to enable motion detection.