![background image](http://html1.mh-extra.com/html/atlantis/a11-uxnvr09/a11-uxnvr09_quick-start-manual_3000501025.webp)
ENG
25
1.3 INSTALLATION(Hard Drive)
Please do NOT install or uninstall hard drive while NVR is running.
Loosen the screws in the left and right sides.
Remove the cover
Connect data cord and power cable.
Install HDD on the bracket, fixed with screws firmly.
Check if the connectors are properly connected and there is no problem with wiring and close up cover, and
fix it with screws.
1.4 NVR CABLING
Connect a VGA/HDMI cord (not included) from your monitor to the VGA/HDMI output on the rear panel of
your NVR (or use RCA Output).
Connect the USB mouse to the USB slot for mouse on the rear panel of the NVR.
Connect one end of the network cable (not included) to RJ-45 port on the rear panel of the NVR.
Connect another end of the network cable to your router, modem or other network connection device.
Plug in both of the Camera & NVR power supply to an open outlet.
In the following diagrams some examples