![background image](http://html1.mh-extra.com/html/atlantis/a03-hp701/a03-hp701_user-manual_3000587025.webp)
ENG
25
Check if the UPS is initiated properly to support continuous operation.
Plug the UPS into the wall outlet to charge the UPS for over
4 hours before using the UPS.
1.8 Front Panel Explanations
On the front panel You can found a LCD Display for an easy diagnostic
LED
Information
Main Switch
To Control on/off the UPS when Utility is normal.
To enable “DC
-
Start” Function when Utility
fails. (To enable DC
Start properly, you are recommended to connect <80% output
load with the UPS only). P.S. Make sure the computer connected
to the UPS is switched on before enable the "DC-Start" function.
You are not recommended to add some other computer or
peripherals after DC-Start function is activated.
1
Input voltage
2
Output voltage
3
AC mode indicator
4
Battery mode indicator
5
Load level indicator, flashing indicates overload
6
Battery capacity indicator, flashing indicates Low Battery