NetServer
18
2.
The main screen will appear as below, and it starts to
search the connected print server within the network.
1.
Device List:
Display the connected print server within
the network.
2.
Control Buttons:
Setup Wizard
,
Change IP Address,
Update Firmware, Show Web Setup, Factory Reset,
Print Test, Discover Device, About,
and
Close.
3.
Information Field:
Display the basic information of the
selected print server in the Device List.
4.
Status Bar:
Display the system status.
Before you can print over the network using your print
server, you may need to perform some basic setup tasks
through PS-Utility. These settings include:
•
Change the print server’s IP Address:
clicking the
Change IP Address
button will bring up a dialog
box that allows you to change the IP Address of
selected print server.
Summary of Contents for A02-PSU
