![background image](http://html1.mh-extra.com/html/atlantis/a02-psu/a02-psu_manual_3000557017.webp)
NetServer
17
1.6 Using The Utilities
This section describes the software utilities for the print
server:
•
PS-Utility
•
PS Wizard
1.6.1 Installing PS-Utility
Follow the procedure outlined below to install PS Utility:
1.
Insert the print server’s Installation CD into the CD-ROM
drive.
2.
Click
Install Utility
from the Auto-Run menu screen.
3.
Once executed, the Setup program will extract files to
launch the InstallShield Wizard; then, follow it step by
step to complete the installation process
After installing the utility, the application program for the print
server is automatically installed to your computer, and
creates a folder in
Start\Programs\PS-Utility
. Now, you
can begin using PS Utility.
To avoid the conflict in your network,
you can use PS-Utility to change the
related settings of your print server
(such as the IP address) after finishing
the installation.
1.6.2 Launching PS-Utility
To launch PS Utility:
1.
Click
Start
->
Programs
->
PS-Utility
, and then click the
PS-Utility v3.11
item.
Summary of Contents for A02-PSU
