Atlantis A02-ATL20, Manual

Page: 5 / 16

ENG
5
Thank you for purchasing this 100Mbps USB 2.0 Fast Ethernet adapter or 1000Mbps
USB 3.0 Gigabit Ethernet adapter.
This device is a cost effective solution that converts a USB port into a 10/100 Base-T
Ethernet(A02-ATL20) port or 10/100/100 Base-T Ethernet(A02-ATL30). It enables low
cost and affordable Fast/Giga Ethernet network connection to desktop, notebook PC,
and embedded system using popular USB ports. Just using your existing USB ports
and you can upgrade your network connection speed.
Please read this manual carefully before use. We will not be responsible for any
damage caused by an improper use.
Safety Instruction:
Please read and follow the instructions as below to ensure that
you can use this unit safely and in a correct way. Meanwhile,
please keep this manual for future reference.
Warning: To prevent any fire or electrical hazards, do not
disassemble or replace any part of the unit. Please contact
professional maintenance person or qualified service centre if
there is any damage to the unit.
 Do not let Children to play this unit alone without adult
supervision.

Do not hit this product.
 Product for indoor use.
 Please pay attention to the waterproof, put it far from high
temperature or freezing areas which will lead to the decrease
of the product performance.
 Fault reparation, do not disassemble by yourself without
professional staff.
System Requirements
 Windows Win 7, Win 8/8.1, Win10
 One available USB port
Features
 Supports 10/100 Mbps auto-sensing capability.
 Supports Auto MDIX (straight and cross network cable auto-detection).

USB specification 1.0, 1.1 and 2.0 compliant.
 Supports USB full and high speed modes with bus power capability.
 IEEE 802.3, 802.3U, and 802.3ab (10Base-T, l00Base-TX) compatible.
 Supports both full-duplex and half-duplex operation in Fast Ethernet.
 Supports suspend mode and remote wakeup via link-up and magic packet.
Package Contents
Before installation, please check the items of the package.