49
PPPoE/PPPoA
Set the PPP Connection as ones as the picture and insert the username and password
provided by ISP.
The same configuration can be used for PPPoA connection. For
this configuration, is necessary to change
Protocol
field from
PPPoE to PPPoA (RFC2364, PPP over ALL5).
You have to pay particular attention to the WAN-ADSL
connection. If you have any doubt turn to qualified personnel or
contact Atlantis-Land technical assistance. Atlantis Land will not
be considered responsible in case of wrong or bad
configuration.
For PPPoE connection, it might be possible that MTU value is too
high for DSL line. Please edit the field
MTU
to 1492 or low.
