Atlantis Land I-Fly A02-WRA2-11B, Quick Start Manual

Page: 31 / 121

ENGLISH
31
jack.
6 POWER Switch A Power ON/OFF switch
1.4 Cabling
First you must connect the product to the ADSL line through the
RJ11 cable you have in equipment (in the port LINE), then
connect to the RJ45 ports the PCs of your Lan or others Switch.
You can get to the Router through the different client wireless
compatible with the IEEE802.11b standard. In the end connect the
feeder to the Router Wireless and then to the socket. Once you’ve
checked all the connections and you’ve turned on the I-Fly
Wireless Lan Router ADSL the product will carry on immediately
a diagnosis (20 seconds). Finished this the Led POWER, SYS and
WLAN (eventually even the Led LAN, if connected to PCs) will
be fixed green . The Led ADSL, if suitably connected, at first will
be flashing , during the ranging process and then it will remain
fixed, once it got ranged (necessary condition for using the
Internet).
1.5 Default Settings
I-Fly Wireless ADSL Router can be configured with your Web
browser. The web browser is included as a standard application in
following operation systems, UNIX, Linux, Mac OS, Windows
95/98/NT/2000/Me, etc. The product provides a very easy and
user-friendly interface for configuration.
Before Configuration
This section describes the configuration required by LAN-attached
PCs that communicate with the I-Fly Wireless ADSL Router ,
either to configure the device, or for network access. These PCs
must have an Ethernet interface installed properly, be connected to
the I-Fly Wireless ADSL Router either directly or through an