Atlantis Land DiskMaster NAS G303S, Quick Start Manual

Page: 38 / 55

38
1.7 Default Settings
The TCP/IP protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows relative manuals.
Before you configure this device you need to know the following default settings:
 Username : admin
 Password: atlantis
 IP address: by DHCP, (If a DHCP server isn’t available in the network,
the Disk Master will use 192.168.1.1 and Subnet Mask 255.255.255.0).
 Server name: Disk Master
Disk Master saves all settings on formatted Hard Disk. If this isn’t
present all settings will be lost when Disk Master is turn off.
1.8 Hardware Installation
Following is a quick installation guide to get you up and running. For further details on
each of the settings, please refer to manual on CD.
 Release the magnetic front cover.

Insert SATA HDD.
 Put back the front cover.
 Please use the ethernet cable to connect the device and the Router/Switch
in the network.
 Please turn on the Power Switch.
Please check the following pictures.