Atlantis Land A05-15AM-E01, User Manual

Page: 5 / 44

ENGLISH
A05-15AM-E01_X02 5 - 44
Important Safety Instructions
•
Read the Safety Instructions carefully and keep it for later use.
•
Be aware of all warnings and instruction signs marked on the products.
•
When cleaning, turn off the electrical supply at all times. Never use liquid or aerosol
detergent, use a damp rag instead. For more details, please refer to Pag. 4 “Cleaning
the Monitor.”
•
Always keep the product away from heavy moisture.
•
Keep this product stable all times. The product may fall causing serious damage.
•
Do not clog apertures on the bezels used for ventilation purpose. Do not install this
product in poor ventilated areas. Always keep this product away from all kinds of heat
sources.
•
The power source used for this product must match one marked on the product's
label. Please consult your dealer if you have any doubt.
•
In order to avoid electric shock, a 3-wire plug with a grounding pin is provided. Do not
use any kind of plug without grounding.
•
Do not lay the power cord in a pathway or rest anything heavy on it.
•
Do not insert objects or pour liquid into this product through apertures on bezels. It
may touch a high voltage area causing an electric shock or short circuit.
•
Do not attempt to repair the product by yourself. It may expose you to electric shock.
Contact a dealer near you for service.
•
Do not plug the power cord in under the following circumstances. A qualified field
service electrician is needed.
•
When the power cord is damaged or frayed.
•
If liquid has been poured into the product.
•
If the product has been exposed to rain or heavy moisture.
•
If the product can't be adjusted and operated properly by following the operative
instructions. Intent to do more advanced adjustments may result in extensive work
for field service electrician.
•
If the product has been dropped or the casting is broken.
•
If there is a dramatic change of the performance.
•
A proper type of power cord has been selected according to the safety of destination
and must be used to prevent electric shock.