31
EN
TEST
Main body
Heating reg.
Identification
Version
Verification of the heating element's operation.
Information about the percentage of operation.
Appliance identification
Version identification.
Information
Load-shedding
Our appliances are compatible with different load-shedding systems. However, you should
not use load-shedding by cutting off the power supply because this is incompatible with our
appliances. Total and repeated power supply cut off may cause premature wear and damage
to electronic cards that are not covered by the manufacturer’s warranty. During load-shed-
ding periods, the screen switches to standby mode.
The unit then returns to its initial operating mode.
In order to increase the life of the appliance and to optimize its operation, an automatic
steam trap is integrated on the upper part of the radiator frame.
This one works in total autonomy and does not require any manipulation of the user
Automatic steam trap
Summary of Contents for SFLC DIG2
Page 1: ...1 OK 19 0 ...
Page 120: ...120 U0648871 D JANV 20 ...
