![Atlantic R4GHD-T2S Installation And User Manual Download Page 29](http://html1.mh-extra.com/html/atlantic/r4ghd-t2s/r4ghd-t2s_installation-and-user-manual_2999800029.webp)
The radiator is very hot on
the surface
It is normal for the radiator to be hot when in operation; the maximum
surface temperature is limited in compliance with the NF Electricity
Performance standard. Nevertheless, should you deem your radiator to be
too hot, check that the power is appropriate for the surface area in your
room (we suggest 100W / m2 for a ceiling height of 2.5m) and that the
radiator is not in a draft that would hinder its operation.
There is a significant difference
between the ambient room
temperature and the settled
temperature of instruction of
the radiator.
After 6 hours of stabilization, you can make an adjustement of your radiator,
by a long push (3 sec) on
and
. Settle the difference of noticed
temperature with the
or
keys, then validate with the
key.
11 - Appendices
11.1 - Warning
- In order to avoid overheating do not cover the heating device
.
- Do not allow children to lean against the radiator and do not allow them to play nearby when it is in operation,
as the surface may cause skin burns particularly because their reflexes have not yet been acquired or are
slower than those of an adult. To prevent risks, have a protective rail installed in front of the radiator.
- This device has not been designed to be used by people (including children) whose physical, sensory, or
mental capacities are limited, or persons lacking experience or knowledge, unless they have supervision or
instructions concerning the use of the device from a person responsible for their security.
- Supervise children to be sure they do not play with the device.
- Do not insert objects or paper into the device.
- All servicing inside the device must be performed by a qualified professional.
- For any repairs, the machine must be unpowered and cooled before lifting it from its base.
11.2 - Device Identification
Before calling our service center, please identify the device’s references. They are written on the identification
label located on the right side of the device.
A Standards, quality labels
B Marketing name
C Marketing code
D Manufacturing reference
E Serial Number
F Manufacturer’s number