4 - Heating Your Room
What you want to do
What you need to do so
What will happen
Start the radiator
Press and hold the
keys.
When the radiator is used for the first
time, the screen lights up and indicates
the Comfort mode (
) temperature by
default. On restart, the screen displays
the temperature and mode in use before
the radiator was switched off.
Activate the screen in
standby mode
Press any key
The screen displays the current mode
and associated temperature. When first
used the device is in comfort mode
and the temperature is set at 19°C.
5 - Heating Modes - When to Use Them
5.1 - Choosing Your Heating Mode
The first time your device warms up, a slight odor may be noticed. This is due to the elimination of residue left
during radiator manufacturing and disappears after a few moments in operation.
Pictogram
Designation
When to Use This Mode
Comfort
You are home.
Eco
You are absent for 2 to 48 hours or you are sleeping.
d
Freeze
Protection
You are absent for more than 48 hours or during summer. The
Freeze Protection temperature is set at approximately 7°C and
may not be changed.
PROG
Programming
If you want your device to follow a scheduler’s orders (recorded
program). You will have alternating Comfort and Eco modes
at the times you have specified. Consult Chapter 6.1 for more
detailed explanations.
Comfort -1
These heating modes are only accessible when a power manager
is present in your installation.
Comfort -2
5.1.1 - Using Comfort Mode
What you want to do
What you need to do so
What will happen
Chose your COMFORT
heating mode
Press the and keys.
Stop on the mode
.
The cursor flashes under
mode.
Validate with the
keys.
Only the chosen mode is displayed
with the corresponding temperature.
Change the temperature set
for COMFORT mode.
Press the
and
keys.
The temperature moves in increments
of 0.5°C and flashes.
Stop on the desired temperature and
validate with the
keys.
The new temperature chosen is
displayed.
5.1.2 - Using Eco Mode
What you want to do
What you need to do so
What will happen
Choose the ECO heating
Mode.
Press the and keys.
The cursor moves under the
Modes and flashes.
Stop at the Eco mode and validate
with
.
Only Eco mode remains
displayed with the corresponding set
temperature.
