GB
2-2) Standby (Hors Gel) Mode
It is the mode enabling to maintain a temperature of approximately 7°C in the room in case of prolonged
absence from the house.
a) Leave switch
on the Marche position.
b) Set the knob
to .
2-3) Turbo mode
66
It is the mode enabling to set the device into Forced Operation, ensuring prompt temperature increase
in the room over the time defined (maximum power for conventional models and fan activation point
for models with ventilating fan).
a) Leave the switch
on the Marche position.
b) Select the time for the Turbo using the knob
.
c) Press the command
, the indicator
and
lights.
d) The TURBO mode can be interrupted manually before the end of the time set. In order to do
this, press the command
again.
NB:
On a piloted or independently programmed appliance, only the Stop and Anti-frost instructions have
priority when the TURBO mode is activated (the other instructions are ineffective).
3) Use on central heating for versions mixed with fan in WINTER position.
a) Place the switch
on the ON position, the indicator
lights up.
b) Place the temperature knob
on frost-free.
Turbo mode
66
(see paragraph 2-3)
Repeat elements a) to d).
NB:The temperature adjustment of the device is made using the tap C (thermostatic or not).
4) Locking commands
It is possible to lock the knob
or restrict its use, preventing untimely handling of the device (children…).
1- Locking the knob:
a) Set the knob to the position required.
b) Using a small-size flat-blade screwdriver, pull the knob’s cap (1).
c) Detach pin
P
from its stand using a cutting tool.
d) Set pin
P
in the alignment of arrow
B
(2).
e) Refit the cap.
2- Limitation of the knob’s use range:
a) Using a small-size flat-blade screwdriver, pull the knob’s cap (1).
b) Remove the two
P
pins from their stand using a cutting tool.
c) Position the two
P
pins at each end of the operating range desired (3).
d) Refit the cap.
M
AINTENANCE
- To maintain the performance of the device, about twice per year, clear the dust.
Do not use abrasive products.
- For models with a fan, use a vacuum cleaner to clear the air inlet and outlet grids, as well as the filter
(refer to the Filter paragraph).
- You are recommended to have the appliance and the amount of fluid checked by a professional technician
after 6 years of use and replace it if necessary. In the electric version, the amounts of fluid to be introdu-
ced into the appliances are for 500W models 5 litres, for 750W models 6.4 litres, for 1000W models 7.6
litres.
- Any deteriorated fluid must necessarily be disposed of at a waste oil collection station.
°
