50
W
Turn OFF
Lock
4.3 - Command locking
To avoid the commands being changed by children, you may lock
your appliance's commands by pressing and holding
.
Select "Lock"
and validate with
.
Do the same to unlock the commands by selecting "Unlock"
.
4.4- Calibration
Y
ou must wait at least 6 hours for the temperature to stabilise.
Depending on your installation, you may note a different temperature to the one dis-
played on your appliance (a difference of 0.5° C is normal.). In this case, refer to the
"Expert Menu", "Function con
fi
g.' chapter.
4.5 - Shedding
Our appliances are compatible with the different shedding systems via the pilot wire
or io-homecontrol radio. However, you must not use mains disconnection shedding
as this system is incompatible with our appliances. Sharp unplanned and repeated
electricity supply disconnections may cause premature wear and damage to electronic
boards which are not covered by the manufacturer's warranty. During shedding peri-
ods, the screen displays "priority shedding order".
The appliance then returns to its initial operating mode.
Reset
Cancel
Reset
Consumption
63 KWh
6,36 €
RAZ
€
MODE
PROG
Détections
Informations
Programmation
Settings
TURN OFF
Informations
Consommation
corp_U065-7474-B-DIVALI-VERRE-PREMIUM Page 50
Black
