background image

7

TV Wall Mount

Mounting Hardware List      Q’ty

Mounting Hardware List          Q’ty

M8 X 16MM

M6 X 12MM

M5 X 12

M4 X 12MM

M8 X 40

M6 X 35MM

M5 X 30MM

M4 X 30MM

4

4

4

4

4

4

4

4

M4 / M5 washer

M6 / M8 washer

M8 / M6 spacer

M4 / M5 spacer

4

4
4

4

I

J
K

L

M

N

O

P

Q

R
S

T

(7.87 to 23.6) in x 15.7 in

(200 to 600) mm x 400 mm

                 2.95 in x 2.95 in / 75 mm x 75 mm 

                  3.94 in x 3.94 in / 100 mm x 100 mm

OPTION 1

             OPTION 2

TAKE EXTRA CARE AND PAY ATTENTION WHEN YOU FASTEN THE TV MOUNT(S) TO THE 
BACK TV PANEL IN 

STEP 3

.  MAKE SURE TO USE THE APPROPRIATE MOUNTING HARDWARE 

FOR YOUR TV.

1. Select the correct Mounting Hardware according to the screw hole size on your TV. Discard any 
    remaining screws and spacers.

2. Carefully lay your TV face down on a non-abrasive surface, laying padding underneath it to protect 
    the screen.

3.

OPTION 1:

Place the TV plate (B) in the appropriate position, making sure it is CENTERED on the 

                       back of TV and LEVEL. 

OPTION 2:

 Place the right and left TV mounts in their appropriate positions, making sure they are 

CENTERED on the back of the TV and LEVEL with one another.

MM

MM

Summary of Contents for 63636007













Reviews: