Atlantic 074208, Reference Manual, Page: 5 / 24

- 5 - Navilink A59 / REFERENCE GUIDE / 1846 - EN
► Using the sensor with mains power
Power rating 12 - 24V DC.
Type of cable to be used: 0.5 to 1.5 mm
2
rigid or 0.5 to 0.75 mm
2
fl exible with rigid end.
Do not use batteries.
Not compatible with boiler.
▼
Cable connection
1. Bare the end of the wires to around 10 mm.
2. Insert the cable ends into the connection terminals ("Push-in" connectors).
fi g. 4 - Cable connection
Passage des fils
Bornes de connexion
Passage des fils
fi g. 5 - Cable disconnection fi g. 6 - Attaching to a wall
▼
Cable disconnection
Use a fl at-blade screwdriver.
Rotate the small metal plate while pulling on the cable.
► Attaching to a wall
Attach the sensor's rear plate using the screws
(not supplied).
Connection terminals
Cable route
Cable route